![]() Thereafter, the USB stick can be removed. The USB stick will be enumerated and the data will be copied from the SD card to the stick.Īfter finishing the copy operation, a status message will be shown. Contains Segger Embedded Studio project for a custom Bluetooth Low Energy service which provides accelerometer readings and soure code for an Electron App which accesses this service over nRF Cloud. If all files have been copied, the USB stick can be removed and another USB stick can be plugged in.Ī useful project for everyone who has to fill a lot of USB sticks with the same files.ĭirectly after powering up the copy station, you can plug-in a USB stick to the evaluation board. SEGGER J-Link USB port can be used to get logs from the device or communicate with it using the command line interface. The progress of the copy operation will be shown on the display. We do not recommend manual modifications of Embedded Studio Project Files. ![]() Copy contents: Both project files and the SDK files are copied to your workspace. Note that the SDK folder structure is created but if you drill down you will see that all folders are empty. inside embedded studio The only solution I found for now, was to manually modify the. Note: The following project format description is only meant as a reference. Link SDK and copy project sources (default): Project sources are copied to your workspace. A simple copy station which copies all files from the SD card to a connected USB stick. SEGGER Embedded Studio for RISC-V has its own royalty-free ANSI and ISO C compliant C library that has been specifically designed for use within embedded systems. Embedded Studio project file format - SEGGER Wiki Embedded Studio project file format navigation search This article will explain the generic Embedded Studio project format. The following steps illustrate how to copy a project (which conceptually is the equivalent of save project as).
0 Comments
Leave a Reply. |